Influence of Glycerophosphate Salt Solubility on the Gelation Mechanism of Colloidal Chitosan Systems

Recently, thermosensitive chitosan systems have attracted the interest of many researchers due to their growing application potential. Nevertheless, the mechanism of the sol-gel phase transition is still being discussed, and the glycerophosphate salt role is ambiguous. The aim of the work is to analyze the possibility of the exclusive use of a non-sodium glycerophosphate salt and to determine its impact on the gelation conditions determined by rheological and turbidimetric measurements as well as the stability of the systems by measuring changes in the Zeta potential value. It was found that ensuring the same proportions of glycerophosphate ions differing in cation to amino groups present in chitosan chains, leads to obtaining systems significantly different in viscoelastic properties and phase transition conditions. It was clearly shown that the systems with the calcium glycerophosphate, the insoluble form of which may constitute additional aggregation nuclei, undergo the gelation the fastest. The use of magnesium glycerophosphate salt delays the gelation due to the heat-induced dissolution of the salt. Thus, it was unequivocally demonstrated that the formulation of the gelation mechanism of thermosensitive chitosan systems based solely on the concentration of glycerophosphate without discussing its type is incorrect.     

Achieving thermally stable and anti-hydrolytic Sr2Si5N8:Eu2+ phosphor via a nanoscale carbon deposition strategy

Chemical stability of phosphors is critical to the efficiency and lifetime of the white light-emitting diodes. Therefore, many strategies have been adopted to improve the stability of phosphors. However, it is still lack of report on the improvement of thermal stability and hydrolysis resistance of phosphors by a single layer coating. Due to the high transmittance and high chemical inertness of graphene, it was coated on the surface of Sr₂Si₅N₈:Eu²⁺ phosphor by chemical vapor deposition, aiming to improve its thermal stability and hydrolysis resistance. The chemical composition and microstructure of the coating were characterized and analyzed. A nanoscale carbon layer was attached on the surface of Sr₂Si₅N₈:Eu²⁺ phosphor particles in an amorphous state. In coated Sr₂Si₅N₈:Eu²⁺ phosphor, the oxidation degree of Eu²⁺ to Eu³⁺ was significantly suppressed. At the same time, the surface of Sr₂Si₅N₈:Eu²⁺ particle turned from hydrophilic to hydrophobic after carbon coating, and consequently the hydrolysis resistance of Sr₂Si₅N₈:Eu²⁺ phosphor was greatly improved. After tests at 85 °C and 85% humidity for 200 h, the carbon coated Sr₂Si₅N₈:Eu²⁺ phosphor still maintained about 95% of its initial luminous intensity as compared with 35% of the uncoated. By observing the in-situ microstructure evolution of coated phosphor in air-water vapor environment, remained presence of the carbon layer even at 500 °C explained the excellent chemical stability of carbon coated Sr₂Si₅N₈:Eu²⁺ phosphor in complex environment. These results indicate that a nanoscale carbon layer can be used to provide superior thermal stability and hydrolysis resistance of (oxy) nitrides phosphors.     

Microstructural and electrical changes in Ca0.9R0.1CeNbMoO8 (R = Y,Sm, Nd,La) ceramics induced by rare-earth ion doping

Rare-earth ions doped Ca_0.9R_0.1CeNbMoO₈ (R = Y, Sm, Nd, La) ceramics have been successfully prepared by solid-state method, and their modifications to the microstructure and electrical properties are also investigated. The rare-earth ions doped ceramics exhibit the scheelite structure. With the increase in the radius of rare-earth ions, the lattice distortion and bond interaction will be enhanced, and the consistency of grain size will be reduced. The ceramics exhibit negative temperature coefficient (NTC) thermistor characteristics in the temperature range of 473 K-1273 K, and the activation energy decreases with the increase of the radius of rare-earth ions. Rare-earth ions doping can increase the content of Ce³⁺ ions and promote the conductivity of ceramics. Except for Sm³⁺-doped ceramics, the high-temperature aging rate of other ceramics is less than 2%. The existence of some metastable Sm²⁺ ions in Sm³⁺-doped ceramics not only increases the activation energy, but also reduces the high-temperature stability of the ceramics.     

双亲纳米SiO2颗粒的制备及提高渗吸采收率性能

以正辛基三乙氧基硅烷和3-巯基丙基三乙氧基硅烷为改性剂，以双氧水为氧化剂，在水基环境下对亲水纳米SiO2颗粒表面进行改性，得到具有磺酸基和辛基的双亲纳米SiO2颗粒，并通过红外和热重对其化学结构和热稳定性进行分析。将双亲纳米SiO2颗粒分散在地层水中制备纳米流体，并评价纳米流体的稳定性、界面性质和渗吸效率。利用核磁共振技术探究纳米流体渗吸过程中岩心孔隙内原油运移规律。结果表明，纳米流体储存30 d未出现分层现象，表现出良好的稳定性；经纳米流体处理的岩心亲水性增强。此外，双亲纳米SiO2颗粒将油水界面张力降低至1.7 mN/m；纳米流体渗吸采收率高达22.6%，渗吸初始阶段小孔隙中的原油被动用，而在渗吸后期阶段大孔隙中的原油才被动用。     

Ternary type BaY2ZnO5: Eu3+ deep-red phosphor for possible latent fingerprint,security ink and WLED applications

Pc-WLEDs are considered to play a spectacular role in future generation light sources in view of their outstanding energy efficiency. In this regard, Eu³⁺ activated BaY₂ZnO₅ phosphor was prepared and investigated by XRD, PL and SEM analyses. Rietveld refinement analysis was carried out to confirm the structure of the synthesized phosphor. The prepared phosphor shows an intense red emission around 627 nm under excitation by near UV light. The ⁵D₀-⁷F₂ transition intensity of the prepared phosphor is three times higher compared to the commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The CIE colour coordinates of BaY₂ZnO₅:Eu³⁺ (9mol%) phosphor corresponds to be (0.6169, 0.3742) and it has a high 97.9 % colour purity. The obtained results reveal the utility of BaY₂ZnO₅:Eu³⁺ phosphor as an efficient red component in WLEDs, anti-counterfeiting and fingerprint detection applications.     

Influence of Co/W co-doping on structural and electrical properties of Na0.5Bi2.5Nb2O9 piezoelectric ceramics

Co/W co-doped Na_0.5Bi_2.5Nb_2-x(Co_1/3W_2/3)_xO₉ (NBNCW-x) ceramic samples were prepared by the conventional solid state reaction method. The electrical properties and crystal structure of the NBNCW-x ceramic samples were analyzed in detail. The XRD and Rietveld refinement results showed that the samples lattice distortion decreased with the increment of Co/W doping. The XPS results showed that the number of oxygen vacancies in the Na_0.5Bi_2.5Nb₂O₉ ceramics could be reduced by the substitution of a small amount of Co/W. The weakened lattice distortion and reduced number of oxygen vacancies of the Na_0.5Bi_2.5Nb₂O₉ ceramics synergistically contributed to its improved electrical properties. In particular, the Na_0.5Bi_2.5Nb_1.97(Co_1/3W_2/3)_0.03O₉ ceramic exhibited the best performance, and its T_c, d₃₃ and P_r were 780 °C, 24.9 pC/N and 12.6 μC/cm², respectively. The dielectric loss was only 3.3% at 550 °C. In addition, this ceramic exhibited excellent thermal stability, with the d₃₃ value of the ceramic being 95.2% of its original value when annealed at 750 °C. These properties indicate that the Co/W co-doped Na_0.5Bi_2.5Nb₂O₉-based ceramics have potential application in the high-temperature field.     

优化GD-模糊规则的滑坡预报模型研究

为了提高滑坡灾害预报准确率，改善传统的滑坡监测和预报中存在的参数选取困难及模糊控制系统作为预报模型精确度不高的问题，首先采用山体结构稳定性分析法进行滑坡灾害参数的选取，得出降雨量、含水率、土压力及岩土表面位移增量作为预报参数的结论；其次将选取的参数作为模糊系统的输入，建立滑坡灾害发生概率模型，并引入优化的GD算法修正预报模型中的动态参数，使模糊控制模型具有自适应性；同时与未优化的模糊控制模型以及单独模糊控制模型进行仿真对比，仿真结果表明，该控制算法收敛速度快，具有很好的收敛性；最后将该模型在某滑坡重点灾区实验区进行实验测试，实验结果显示该模型具有较好的收敛性，且预报精度达到90%。     

An adjusted K‐medoids clustering algorithm for effective stability in vehicular ad hoc networks

Recently, the routing problem in vehicular ad hoc networks is one of the most vital research. Despite the variety of the proposed approaches and the development of communications technologies, the routing problem in VANET suffers from the high speed of vehicles and the repetitive failures in communications. In this paper, we adjusted the well‐known K‐medoids clustering algorithm to improve the network stability and to increase the lifetime of all established links. First, the number of clusters and the initial cluster heads will not be selected randomly as usual, but based on mathematical formula considering the environment size and the available transmission ranges. Then the assignment of nodes to clusters in both k‐medoids phases will be carried out according to several metrics including direction, relative speed, and proximity. To the best of our knowledge, our proposed model is the first that introduces the new metric named “node disconnection frequency.” This metric prevents nodes with volatile and suspicious behavior to be elected as a new CH. This screening ensures that the new CH retains its property as long as possible and thus increases the network stability. Empirical results confirm that in addition to the convergence speed that characterizes our adjusted K‐medoids clustering algorithm (AKCA), the proposed model achieves more stability and robustness when compared with most recent approaches designed for the same objective.     

Unconditional stability and error estimates of the modified characteristics FEMs for the time-dependent incompressible MHD equations

This paper focuses on the unconditional stability and convergence of characteristics type methods for the time-dependent incompressible MHD equations. For this purpose, we introduce a new characteristics time-discrete system. The optimal error estimates in $L^2$ and $H^1$ norms for the typical modified characteristics finite element method unconditionally can be deduced, while the whole previous works require certain time-step restrictions. Some numerical experiments document performance of the characteristics type methods for the time-dependent incompressible MHD equations.